Cool 3×1 DTZ enamel lacquer

CHARACTERISTICS AND PURPOSE

COOL 3×1 DTZ EMAJL is an anti-corrosive primer and finish coating based on modified alkyd binders, special pigments and additives. It is used to protect items made of galvanized sheet, aluminum, copper and steel in the interior and exterior. It is characterized by good adhesion, high weather resistance and resistance to UV radiation.

SURFACE PREPARATION

The surface on which COOL 3×1 DTZ ENAMEL is applied must be firm, dry, free of greasy stains and impurities. Remove any remnants of old paint or traces of oxidation. Sand the surface with fine sandpaper N°220/320. Degrease and clean with thinner. Mix the paint well before use. If necessary, dilute with max 5% COOL 3×1 thinner. It can be applied directly to surfaces previously cleaned of corrosion. It is applied by brush, roller or spraying in two layers. Apply the second layer after 1-2 hours. COOL 3×1 DTZ ENAMEL is dry to the touch for up to 2 hours, completely dry after 24 hours. Clean the tools immediately after use with Nitro thinner.

CONSUMPTION

6-8 m²/l in two layers

PACKAGING

0.75 l

SHELF LIFE AND STORAGE

36 months from the date printed on the packaging. Store in the original, well-closed and undamaged factory packaging at a temperature of +5ºC to +25ºC.