COOL FACADE OIL COATING

GENERAL INFORMATION AND PURPOSE

FACADE OIL COATING is a final coating made on the basis of acrylic binder, permanent pigments, fillers, additives and organic solvents. It is intended for decoration and protection external wall surfaces and walls in the interior from mortar, concrete, aerated concrete and brick. It can be used for repair, painting and covering of old dispersion coatings on facade surfaces.

It adheres perfectly to the mineral substrate, has high covering power and whiteness, is vapor-permeable and water-repellent. It is resistant to atmospheric influences, UV radiation, alkalis, salts and industrial gases. Not recommended for use and dyeing for fresh not yet carbonized lime and lime-cement surfaces

INSTRUCTIONS FOR USE

Before applying the FACADE OIL COATING, the surfaces must be dry, clean, and solid. From old, damaged ones surface, remove dust, loosely attached parts and other elements that are crowned and fall off (mechanically dry or by washing). Repair all unevenness and cracks with COOL UNI glue. Before painting, impregnate the walls with COOL facade impregnation. It is applied by brush, roller or spraying in two layers. Before use, dilute the paint with 5-10% oil thinner. Apply the second layer over the dried first layer after 24 hours.

It can be applied in a wide temperature range, in different climatic conditions.

After use, wash the tool with an oil thinner.

CONSUMPTION

170-310 ml/m² in two layers, depending on the porosity and absorbency of the substrate.

PACKAGING

25 kg

SHELF LIFE AND STORAGE

18 months from the date stamped on the packaging. Store in the original, well-closed and undamaged factory packaging, at a temperature of +5ºC to +25ºC.

WORKING TEMPERATURE

The optimal working temperature is between +10ºC and +30ºC. It should not be used below +5ºC. Avoid using facade paint in rain, fog, wind and strong sunlight. Protect freshly painted surfaces from atmospheric influences with curtains for at least 24 hours.