Cool kada fresh
GENERAL INFORMATION AND PURPOSE
COOL KADA FRESH It is used for the restoration and repair of small damaged areas of the bathtub.
It is applied by brush, roller or spraying in two layers. For metal bathtubs, the acrylic repair enamel is applied over the COOL acrylic metal primer. For plastic bathtubs, the repair is done using only the COOL acrylic enamel.
INSTRUCTIONS FOR USE
To clean the bathtub after repair, avoid using strong chemical or abrasive cleaners.
The surface of the bathtub should be cleaned of any rust, limescale, silicone, and any soap or grease deposits before painting, in order to ensure a longer-lasting effect. The cleaned and degreased surface should be sanded with appropriate sandpaper (180-220) and thoroughly dried to ensure better adhesion of the acrylic paint. Larger bathtub damages (such as larger cracks, fractures, or holes of 2-3 cm) should be repaired with a suitable polyester kit for bathtubs. COOL bathtub fresh should be diluted with a maximum of 10% water before use and thoroughly mixed. Apply the second coat after the first coat has dried for 6-8 hours. Clean the tools with water immediately after use. The optimal working temperature for application is between +10ºC and +30ºC.
CONSUMPTION
8-10 m2/l per coat.
PACKAGING
0.65 l
SHELF LIFE AND STORAGE
18 months from the date stamped on the packaging. Store in the original, in well-closed and undamaged factory packaging at a temperature of +5ºC to +25ºC.
