Cool NC 016

GENERAL INFORMATION AND PURPOSE

A special primer for secure adhesion of COOL 016 adhesive to ceramic tiles when tiling over tiles. It is used for absorbent substrates and problematic surfaces with a quick-drying property. It is applied to cement and dry surfaces such as gypsum boards, concrete, tiles, etc.

INSTRUCTIONS FOR USE

Before applying, dilute COOL NC 016 with water in a ratio of 1:3 (1 part COOL NC 016 and 3 parts water). For wooden surfaces, apply undiluted. Apply in a thin and even layer with a brush, ensuring no unevenness or relief structures. Depending on the application conditions, the drying time of the coating may be extended. The optimal working temperature is between +5°C and +30°C. It should not be used below +5ºC. After use, clean the tools immediately with water.

CONSUMPTION

40-130 ml/m² in two layers, depending on the porosity and absorbency of the substrate.

PACKAGING

1 l

SHELF LIFE AND STORAGE

Store for 18 months in the original, tightly sealed, and undamaged packaging at a temperature of +5ºC to +25ºC, protected from direct sunlight and freezing.