{"id":33999,"date":"2024-05-21T14:25:51","date_gmt":"2024-05-21T14:25:51","guid":{"rendered":"https:\/\/nevenacolor.co.rs\/proizvod\/cool-nova-art-dina\/"},"modified":"2025-01-27T16:47:28","modified_gmt":"2025-01-27T16:47:28","slug":"cool-nova-art-dina","status":"publish","type":"product","link":"https:\/\/nevenacolor.co.rs\/en\/products\/cool-nova-art-dina\/","title":{"rendered":"COOL NOVA ART DINA"},"content":{"rendered":"

GENERAL INFORMATION AND PURPOSE<\/strong><\/h3>\n

COOL NOVA ART DINA is a high-quality ecological water-based acrylic paint, made from special water dispersions, high-quality fillers, and special effect pigments. It is intended for the decoration and protection of interior wall surfaces, to create visually appealing textured surfaces and special effects. It is characterized by good vapor permeability and is easy to apply. It is available in three shades: silver, gold, and bronze.<\/p>\n

INSTRUCTIONS FOR USE<\/strong><\/h3>\n

COOL NOVA ART DINA is a ready-to-apply paint and does not require dilution with water. The surface it is applied to must be firm, dry, clean, and free from poorly adhered parts, oil stains, etc. Uneven surfaces should be leveled with COOL GLET MASS. Before applying the decorative technique, the surface should be coated with COOL NOVA ART PRIMER, with a drying time of at least 6 hours. COOL NOVA ART DINA is applied with a wide paintbrush, typically in one layer, but depending on the desired effect, it can be applied in two layers. The final appearance of the surface is achieved through different application techniques. Different patterns on the wall are created depending on the movements and techniques of the applicator. Application technique: 1. Apply COOL NOVA ART DINA in one layer using light brush strokes in all directions on a 1-2 m2<\/sup>. surface. After 5 to 10 minutes, lightly go over the applied material with a dry brush to create the final appearance and remove brush marks.
\n2. Gradually apply the material in smaller amounts in one layer using diagonal, vertical, or horizontal brush strokes on a 1-2 m\u00b2<\/sup> surface. After 5 to 10 minutes, lightly go over the applied material with a dry brush in opposite movements to the previous ones to achieve the final look.
\nThe first layer dries in 4 to 6 hours under normal drying conditions, depending on the thickness of the application. The optimal working temperature is in the range of +10\u00b0C to +30\u00b0C. It must not be used below +5\u00b0C. Clean tools immediately with water.<\/p>\n

CONSUMPTION<\/strong><\/h3>\n

7-9 m 2<\/sup>\/l<\/p>\n

PACKAGING<\/strong><\/h3>\n

1l<\/p>\n

SHELF LIFE AND STORAGE<\/strong><\/h3>\n

18 months, store in the original, tightly closed, and undamaged packaging at a temperature of +5\u00baC to +25\u00baC, protected from direct sunlight and freezing.<\/p>\n

DOCUMENTATION<\/strong><\/h3>\n
\n

TECHNICAL DOCUMENTATION<\/a><\/p>\n

SAFETY DATA SHEET<\/a><\/p>\n<\/div>\n

 <\/p>\n