Cool POL
COOL POL is eco-friendly paint for interior wall surfaces. It is intended for the decorative protection of interior wall surfaces and ceilings. It has highwhiteness capacity, highspreading, coverage and vapor permeable. Resistant to dry wiping. It is suitable for all types of mineral, dry and hard surfaces, modified cement surfaces and gypsum plasterboards, for walls already painted with dispersion paints. We recommend the use of aCOOL concentrate toners, if you wish to produce pastel shades
Application:
Before applying COOL POL, removedust, grease, water-soluble salts, poorly bonded parts and other elements that crumble and fall off from old, damaged surfaces (mechanically,in dry condition or when washed). Repair any unevenness and cracks with appropriate material. Prior to painting, the walls should be impregnated with the COOL undercoatdepending on the surface condition. If necessary, apply the COOL powder coating in two layers, if a better appearance of the final dry film is desired. The new walls must be completely dry and dust free. Apply COOL POL with a brush, roller or sprayer, usually in two layers. If necessary, thin with 15% -20% water. Before thinning, mix the contents of the container well. Apply the second layer over the dried first layer in 6 hours. The required shade is obtained by mixing COOL POL and COOL toner concentrate (pastel tones). After use, wash the toolsimmediately with water. The optimum operating temperature is from + 10ºC to + 30ºC. Do not use it below +5ºC.
Shelf life and storage:
18 months keep in the original, well closed and undamaged factory packaging at temperatures from +5ºC to +25ºC.
Coverage:
125 – 180 ml/m2 in two layers depending on surface porosity and absorption.
Packaging units:
5 kg, 8 kg, 25 kg